Toshiba TECRA R10 manual Sound/USB board and MIC Harness Replacement Procedure

4.23 Sound/USB board and MIC HARNESS 4 Replacement Procedure

Installing the Sound/USB board and MIC HARNESS (Internal microphone)

To install the Sound/USB board and MIC HARNESS, follow the steps below and refer to Figure 4-34.

1.Set the MIC HARNESS to the slot in place.

2.Set the Sound/USB board in place and secure it with the following screw.

• M2.0⋅4B BIND screw ⋅1

3.Connect the SOUND/USB HARNESS, speaker harness and MIC HARNESS to the connector CN9820, CN6180 and CN6050 on the Sound/USB board.

4.Connect the SOUND/USB HARNESS to the connector CN9520 on the system board.

TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 4-59