3.32 SETUP | 3 Tests and Diagnostics |
(d) SATA Controller Mode
This feature sets the SATA Controller Mode.
AHCISets AHCI which is the mode for VistaTM (default)
Compatibility Sets the mode for legacy OS. Use this mode when the driver corresponding to AHCI is not used.
10.PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for information only and cannot be changed.
PCI BUS | = IRQ10, IRQ11 |
11.Display
This group of options configures the computer’s display.
(a)Power On Display
This option is used to select the display when booting up.
LCD+AnalogRGB Selects both the internal LCD and the external monitor for simultaneous display.
NOTE: Pressing Fn+F5 changes the display setting in the order of internal LCD to simultaneous to external monitor.
12.Peripheral
Use this option to select the peripheral’s mode.
(a)Internal Pointing Device
This option enables or disables the touch pad
Enabled | Enables the touch pad. (Default) |
Disabled | Disables the touch pad. |
TECRA R10 Maintenance Manual | [CONFIDENTIAL] |
