
4 Replacement Procedure | 4.29 LCD unit |
4. Set the LCD COV CAP L and LCD COV CAP R while engaging the latches.
CAUTION: Make sure that harnesses are not pinched.
5. Secure the LCD COV CAP L and LCD COV CAP R with the following screws.
• M2.0⋅8C OTHER screw | ⋅2 (1 each) |
6.Stick two MASK SEALs (silver) on the LCD COV CAP L and LCD COV CAP R.
7.Set the LCD MASK ASSY on the LCD COVER ASSY and secure it with following crews.
• M2.5⋅4C FLAT HEAD screw ⋅6 (upper ⋅4, bottom 2 )
8. Stick four LCD CUSHONs and two MASK SEALs (black) on the LCD mask.
[CONFIDENTIAL] | TECRA R10 Maintenance Manual |