
4 Replacement Procedure |
| 4.28 TOUCH PAD/Fingerprint sensor board |
7. Remove the following screws and peel off the Fingerprint sensor board. | ||
• M2.0⋅4C | ⋅ 2 |
8.Remove the TP SPILL CUSHION from the Fingerprint sensor board.
9.Remove the D STICK TAPE TP.
M2.0x4C
TP SPILL CUSHION
Fingerprint sensor board
D STICK TAPE TP
Figure 4-45 Removing the TOUCH PAD /Fingerprint sensor board (4)
[CONFIDENTIAL] | TECRA R10 Maintenance Manual |