4.16 | 4 Replacement Procedures |
3.Remove the acetate tape.
4.Disconnect the CAMERA HARNESS from the connector CN9540 on the system board and two 3G antenna cables from the terminals on the 3G card.
5.Disconnect the RJ45 WIRE HARNESS from the connector CN4100 on the system board.
6.Take the harness of RJ45 WIRE HARNESS, CAMERA HARNESS, the 3G antenna cables and wireless LAN antenna cables out of the guides on the HARNESS HOLDER R.
CAMERA HARNESS
Harness of RJ45 WIRE
HARNESS
CN4100
Acetate tape 
CN9540
Wireless LAN antenna cable
3G antenna cable
Figure 4-22 Removing the DC-IN HARNESS/RJ45 WIRE HARNESS (2)
TECRA R10 Maintenance Manual | [CONFIDENTIAL] |
