4.29 LCD unit | 4 Replacement Procedure |
Installing the LCD unit
To install the LCD unit, follow the steps below and refer to Figure
1.Connect the LCD harness to the connector of the LCD unit.
2.Stick a new INSU HNS CONN on the LCD connector and LCD HARNESS (connector).
CAUTION: Stick a new LCD HNS CONN as shown below.
LCD connector
3. Install the LCD unit to the LCD COVER ASSY in place.
CAUTION: Arrange the LCD harness, CAMERA HARNESS and antenna cables as shown below.
Arrange the cables between the ribs on LCD COVER.
LCD harness
CAMERA HARNESS, antenna cables
TECRA R10 Maintenance Manual | [CONFIDENTIAL] |
