4 Replacement Procedures

4.16 DC-IN HARNESS/RJ45 WIRE HARNESS

7.Remove the following screws and remove the HARNESS HOLDER R from the slot while releasing three latches (pulling two latches and pushing one inside as shown in the figure).

• M2.5⋅6C

FLAT HEAD screw

⋅1

8. Remove the RJ45 WIRE HARNESS from the HARNESS HOLDER R.

RJ45 WIRE HARNESS

HARNESS HOLDER R

M2.5x6C FLAT

HEAD

Latch

Latch

Figure 4-23 Removing the DC-IN HARNESS/ RJ45 WIRE HARNESS (3)

4-40

[CONFIDENTIAL]

TECRA R10 Maintenance Manual (960-708)

Page 266
Image 266
Toshiba TECRA R10 manual Removing the DC-IN HARNESS/ RJ45 Wire Harness