
4 Replacement Procedures4.12 ExpressCard slot/KILL SW HOL ASSY
4.12 ExpressCard slot/KILL SW HOL ASSY Removing the ExpressCard slot/KILL SW HOL ASSY
NOTE: Before starting, make sure that a dummy card is removed.
To remove the ExpressCard slot (EXPRESSCARD CONNECTOR WITH FPC) /KILL SW HOL ASSY, follow the steps below and refer to Figure
1.Turn over the BASE ASSY.
2.Remove the following screws securing the ExpressCard slot.
• M2.0⋅5B | ⋅4 |
3.Remove the ExpressCard slot from the BASE ASSY.
4.Peel off the INSU EXP SLOT UP from the ExpressCard slot.
INSU EXP SLOT UP
M2.0x5B
ExpressCard slot
M2.0x5B (EXPRESSCARD CONNECTOR WITH FPC)
BASE ASSY
Figure 4-16 Removing the ExpressCard slot
[CONFIDENTIAL] | TECRA R10 Maintenance Manual |