Toshiba TECRA R10 manual Wake-up on LAN function whenoperating from the battery

3 Tests and Diagnostics 3.32 SETUP

(f) Auto Power On

Use this option to set a time and date for automatic power on and enable or disable the ring indicator feature. Alarm Date Option appears only when Alarm Time is enabled.

	OPTIONS
		= Disabled
Alarm Time
Wake-up on LAN		= Disabled
on Battery		=	Disabled
Critical Battery Wake-up		=	Enabled

Set the parameters for the Auto Power On (automatic power on) function and the Wake-up on LAN in the “OPTIONS” window. To set the time, use Space or BackSpace. Press ↓ to move the cursor to the right and ↑ to move the cursor to the left when you set the date and time.

For the Alarm Time, set the time to turn on the power automatically. The “second” cannot be set. When it is set to “Disabled”, the time to turn on automatically is not set.

The Wake-up on LAN is a function to turn on the power automatically by the call from the administrator. It can be set to “Enabled” only when “Built-in LAN” is set to “Enabled”. To activate this function, use the AC adapter.

On Battery

The following settings can be changed when the Wake-up on LAN is Enabled.

Enabled	Wake-up on LAN function whenoperating from the battery.
Disabled	Wake-up on LAN function whenoperating from the battery
	(Default).

NOTE:

1.Do not remove the AC adaptor and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option.

2.If you have set a password and the computer boots by the Auto Power On function and Standby is on, the computer will start with the instant security function enabled. The password = message is not displayed; however, you must enter the password to use the computer.

3.This option is enabled only once, the setting is reset, after booting up.

3-90 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)