
4 Replacement Procedures | 4.14 Wireless LAN card |
4.14 Wireless LAN card
CAUTION: Do not touch the connectors on the Wireless LAN card. Debris on the connectors may cause the wireless LAN card access problems.
Removing the Wireless LAN card
To remove the wireless LAN card, follow the steps below and refer to Figure
1.Disconnect two Wireless LAN antenna cables from the wireless LAN card.
2.Remove the following screws securing wireless LAN card.
• M2.0⋅4B | ⋅2 |
3. Disconnect the Wireless LAN card from the connector CN2600 on the system board.
M2.0⋅4B S-THIN HEAD
Wireless LAN antenna cable | CN2600 |
|
Wireless LAN card
Figure 4-19 Removing the Wireless LAN card
[CONFIDENTIAL] | TECRA R10 Maintenance Manual |