
4.14 Wireless LAN card | 4 Replacement Procedures |
Installing the Wireless LAN card
To install the Wireless LAN card, follow the steps below and refer to Figure
1.Insert the Wireless LAN card to the connector CN2600 on the system board slantwise and press it to connect firmly.
NOTE: Align the notch of the Wireless LAN card to the guide of the connector.
2. Secure the Wireless LAN card with the following screws.
• M2.0⋅4B
3. Connect two Wireless LAN antenna cables to the connectors on the wireless LAN card.
TECRA R10 Maintenance Manual | [CONFIDENTIAL] |