Toshiba TECRA R10 manual Hinge Replacement Procedure, Installing the Hinge

4.31 Hinge 4 Replacement Procedure

Installing the Hinge

To install the hinge, follow the steps below and refer to Figure 4-54.

CAUTION: Before setting the hinge, apply LOCTITE 425 to the bosses shown in the figure below.

1.Set the hinges (BH L ASSY/BH R ASSY) on the LCD COVER ASSY in place and secure them with the following screws.

• M2.5⋅4B S-THIN HEAD ⋅4 (2 each)

CAUTION: When replacing to new hinges, stick new SQUARE CUSHIONs (L1,M1) to the hinges in the places as shown below.

SQUARE

CUSHION (L1)

SQUARE

CUSHION (L1)

TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 4-85