3.20 ONLY ONE TEST | 3 Tests and Diagnostics |
Subtest 7 Acceleration sensor
This subtest detects and corrects the each axis (X, Y, Z).
NOTE: Make sure that this subtest is executed on the following condition:
1.Flat desk with vertical plane to get the stability of machine.
2.The vertical wall or plane is necessary.
3.Prevent the machine from shake or shock.
<Example>
Set the machine
against the vertical planeVertical plane with the Front upward
Flat desk
The figure below shows the name and position of each side.
Top
(heaven surface)
Back | Right side |
|
Left side | Front |
TECRA R10 Maintenance Manual |
