
4.9 Optical disk drive | 4 Replacement Procedures |
4.9Optical disk drive (DVD-Super Multi drive)
Removing the Optical disk drive
To remove the Optical disk drive, follow the steps below and refer to Figure
CAUTION: When the optical disk inside the optical disk drive can not be ejected because of some failure, open the disc tray by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole near the eject button.
1. Remove the following screws securing the ODD ASSY.
• M2.5⋅6C | FLAT HEAD screw | ⋅2 |
2.Remove the ODD ASSY from the slot while pushing it in the direction as shown in the figure below.
M2.5x6C FLAT HEAD
ODD ASSY
Figure 4-9 Removing the Optical disk drive (1)
NOTE: The circled number shows the order to drive the screws.
TECRA R10 Maintenance Manual | [CONFIDENTIAL] |