TECHNICAL SUPPORT (FAQ)
Problem & Question |
|
| Possible Solution | ||
|
|
|
| *Check if the Power Switch is in the ON | |
Power LED is not on |
|
| position | ||
|
|
|
| *Power Cord should be connected | |
|
|
|
| *Check if the PC system is Plug & Play | |
|
|
|
| compatible | |
No Plug & Play |
|
|
| *Check if the Video Card is Plug & Play | |
|
|
| compatible | ||
|
|
|
| ||
|
|
|
| *Check if the | |
|
|
|
| Cable is bent. | |
Picture is fuzzy |
|
|
| *Adjust the Contrast and Brightness | |
|
|
| Controls. | ||
|
|
|
| ||
Picture bounces or a wave | *Move electrical devices that may cause | ||||
pattern is present in the picture | electrical interference. | ||||
|
|
|
| *Computer Power Switch should be in | |
|
|
|
| the ON position. | |
|
|
|
| *Computer Video Card should be snugly | |
|
|
|
| seated in its slot. | |
|
|
|
| *Make sure monitor’s video cable is | |
The power LED is ON (Amber) | properly connected to the computer. | ||||
*Inspect monitor’s video cable and make | |||||
but there’s no | video | or | no | ||
sure none of the pins are bent. | |||||
picture. |
|
|
| ||
|
|
| *Make sure computer is operational by | ||
|
|
|
| ||
|
|
|
| hitting the CAPS LOCK key on the | |
|
|
|
| keyboard while observing the CAPS | |
|
|
|
| LOCK LED. The LED should either turn | |
|
|
|
| ON or OFF after hitting the CAPS LOCK | |
|
|
|
| key. | |
Missing one of the primary | *Inspect the monitor’s video cable and | ||||
colors (RED, | GREEN, | or | make sure that none of the pins are | ||
BLUE) |
|
|
| bent. | |
Screen image is not centered | *Adjust pixel frequency (CLOCK) and | ||||
or sized properly. |
|
| FOCUS or press | ||
Picture has color defects |
|
| *Adjust RGB color or select color | ||
(white does not look white) |
| temperature. | |||
Horizontal | or | vertical | *Use win 95/98 | ||
CLOCK and FOCUS or perform hot- key | |||||
disturbances on the screen |
| ||||
| |||||
|
|
|
| ||
17