Planar PCT2265 manual Controls and Connectors Power Cord, Signal Cable, USB Cable a to B

CONTROLS AND CONNECTORS

POWER CORD

Power Source:

1.Make sure that the power cord is the correct type required in your area.

2.This monitor has an internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)

3.Connect the AC-power cord into the monitor’s power input socket, The AC-power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your monitor.

SIGNAL CABLE

Connecting the Signal Cable : Plug one end of the signal cable to the LCD monitor and the other end to a computer or a video source.

USB Cable – A to B

The USB Cable – A to B – must be connected from the monitor to the computer for the touch screen to operate.

Connecting the USB Cable: Plug one end of the cable to the monitor – USB Cable (upstream) slot - and the other end to a USB port on the computer. Refer to page 17 for Calibration and Reset Instructions.

Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

8

1

2 3 4 5 6 878

		Figure 2		Connecting Cables
1.	Power Cable		5.		Audio cable
2.	HDMI Cable		6.		USB Cable*2 (downstream)
3.	DVI Cable		7.		USB Cable (upstream)
4.	D-SUB Cable		8.		USB Cable*2(downstream)

9