8.Insert rear mounting bracket (item 6 pg. 2) with the bent edges downward. Slide bracket rearward between headliner and roof until tabs engage rear O.E. roof brace. Align slots in bracket with center line scribed on roof. See Figure 4. Note: There is a foam sealer between O.E. braces and roof of vehicle. It may require a little force to fully engage tabs of bracket if foam is in that area.
FIGURE 4
9.Install front mounting bracket (Item 7 pg. 2) over rear mounting bracket and align slot with centerline scribe and edge of bracket with front O.E. brace. Secure using (4) four # 10x 1/2" screws. (Item 1 pg.2)
See Figure 5.
FIGURE 5
4