USING THE RESET BUTTON
Press button with a thin, pointed object if unit is malfonctioning. Though not a normal occurrence, the microprocessor which controls the operation of this unit can be affected by electrostatic noise.
This generally is indicated by such symptoms as no power being supplied when you switch the unit on, failure of buttons and controls, or an abnormal display.
Should this happen, press the reset button with a thin, pointed object to reset the microprocessor.
FLASHINGRESET
SPECIFICATIONS
MW(AM) SECTION |
|
Frequency Range | : 530 - 1710 KHz |
Channel Step | : 10 KHz |
Intermediate Frequency | : 450 KHz |
Usable Sensitivity | : 33 dB |
Image Rejection Ratio | : >50 dB |
If Rejection Ratio | : >50 dB |
FM SECTION |
|
Frequency Range | : |
Channel Step | : 200 Khz |
Intermediate Frequency | : 10.7 MHz |
Image Rejection Ratio at 106KHz | : >50 dB |
Signal to noise ratio | : >60 dB |
CD PLAYER SECTION |
|
Signal to noise Radio | : More than 60dB |
Channel separation | : More than 60dB |
Frequency Response | : 20Hz - 20KHz |
GENERAL |
|
Power Supply Voltage | : DC 12 Volts Negative Ground |
Speaker impedance | : 4 - 8 |
Maximum Output Power | : 15W x 4CH |
Dimensions Chassis | : 178(W) x 50 (H) x 160(D)mm |