Icom IC-M504 ïU.S.A., international and Canadian channels, Basic Operation, ï Weather channels

ïU.S.A., international and Canadian channels

The IC-M504 is pre-programmed with 57 U.S.A., 57 interna- tional and 61 Canadian channels. These channel groups may be specified for the operating area.

qPush [CH/WX•DUAL•U/I/C] to select a regular channel.

•If a weather channel appears, push [CH/WX•DUAL•U/I/C] again. w While pushing and holding [H/L], push [CH/WX•DUAL•

U/I/C] to change the channel group, if necessary.

•U.S.A., International and Canadian channel groups can be se- lected in sequence.

eRotate [DIAL] to select a channel.

• “DUP” appears for duplex channels.

	25W	USA
	34°34.506N
	123°23.236W
	UTC 12:00 PORT OPR
	Push	+
25W	INT	25W	CAN
DUP
34°34.506N		34°34.506N
123°23.236W		123°23.236W
UTC 12:00	TELEPHONE	UTC 12:00	CCG

BASIC OPERATION 3

ï Weather channels

The IC-M504 has 10 pre-programmed weather channels.
These are used for monitoring broadcasts from NOAA (Na-
tional Oceanographic and Atmospheric Administration.)
	3
The transceiver can automatically detect a weather alert tone

on the selected weather channel while receiving the channel, during standby on a regular channel or while scanning. (p. 56)

qPush [CH/WX•DUAL•U/I/C] once or twice to select a weather channel.

•“WX” appears when a weather channel is selected.

•“WX ALERT” appears when the Weather Alert function is in use. (p. 56)

wRotate [DIAL] to select a channel.

Push	once or twice
	WX	WX ALERT
34°34.506N		34°34.506N
123°23.236W		123°23.236W
UTC 12:00163.275MHz		UTC 12:00163.275MHz
When weather alert is OFF.		When weather alert is ON.

7