Icom IC-M504 instruction manual DSC Operation, Mmsi code programming

■MMSI code programming

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self ID) code can be programmed at power ON.

This code programming can be performed only twice.

qTurn power OFF.

wWhile pushing [MENU], turn power ON to enter MMSI

code programming condition.

eAfter the display appears, release [MENU]. r Push [MENU] again to enter the DSC menu.

t Rotate [DIAL] to select “Set up,” push [DIAL•ENTER].

--DSC Menu-- Select Item

Position Input Received Calls

˘Set up Exit

yRotate [DIAL] to select “MMSI Check,” push [DIAL•ENTER].

--DSC Menu--

Set up

Add:INDV ID

Add:Group ID

DEL:INDV ID

DEL:Group ID

Offset Time

˘MMSI Check

DSC OPERATION 6

uRotate [DIAL] to set the specific 9-digit MMSI code.

•Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward or backward, respectively.

•Push [CLR] to cancel and return to the set up menu.

		--DSC Menu--	5
MMSI Check
			6
	_	________

<CLR˘Exit / ENT˘OK>

iAfter entering the 9-digit code, push [DIAL•ENTER] to set the code.

• Returns to the set up menu.

oPush [CLR] or rotate [DIAL] to select “Exit,” push [DIAL•ENTER].

•Returns to the DSC menu.

•Repeat again to return to the normal operation condition.

15