Call channel programming

BASIC OPERATION 3

Call channel is used to select Channel 9 (default); however, you can program the call channel with your most often-used channels in each channel group for quick recall.

rRotate [DIAL] to select the desired channel.

25W INT CALL

3

DUP

 

34°34.506N

qWhile pushing and holding

[H/L], push [CH/WX•DUAL•

25W INT DUP

123°23.236W

UTC 12:00 INTL

U/I/C] one or more times to select the desired channel group (U.S.A., International or Canada) to be pro- grammed.

wPush [16•9] for 1 sec. to se- lect the call channel of the selected channel group.

CALL” and call channel number appear.

ePush [16•9] again for 3 sec. (until a long beep changes to 2 short beeps) to enter call channel programming.

Channel number starts blink- ing.

334.506N

123°23.236W

UTC 12:00 INTL

25W INT CALL

TAG

334.506N

123°23.236W

UTC 12:00 CALLING

25W INT CALL

TAG

334.506N

123°23.236W

UTC 12:00 CALLING

tPush [16•9] to program the displayed channel as the call channel.

Push [CLR] to cancel.

The channel number stops blinking.

25W INT CALL DUP

34°34.506N

123°23.236W

UTC 12:00 INTL

9

Page 15
Image 15
Icom IC-M504 instruction manual Call channel programming, While pushing and holding, Push CH/WXDUAL