Icom IC-M504 instruction manual Your position data is transmitted, when Dialenter is pushed

6 DSC OPERATION

When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con- nected, next steps r, t (Current position/time program- ming) do not appear. Go to step y.

rThe position information appears. Set your position (lati- tude and longitude) data by rotating [DIAL].

•Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward or backward, respectively.

•Rotate [DIAL] to edit N; North latitude or S; South latitude when the cursor is on the ‘N’ or ‘S’ position, and W; West longitude or E; East longitude when the cursor is on the ‘W’ or ‘E’ position.

•Push [CLR] for 1 sec. to clear the latitude/longitude data.

•Push [CLR] to cancel and return to the DSC menu.

--DSC Menu--

Input Position

Latitude

__°__.___N Null

Longitude

__°__.___W Null

<CLR 1sec˘Null Data>

<CLR˘Exit / ENT˘OK>

tAfter setting the position data, push [DIAL•ENTER] to set the current UTC time. Set the current UTC time by rotating [DIAL], then push [DIAL•ENTER].

•Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward or backward, respectively.

•Push [CLR] for 1 sec. to clear the UTC time data.

•Push [CLR] to cancel and return to the DSC menu.

--DSC Menu--

Input UTC Time

__:__Null

<CLR 1sec˘Null Data>

<CLR˘Exit / ENT˘OK>

--DSC Menu--

Position Reply Ready

<CLR˘Exit / ENT˘OK>

yPush [DIAL•ENTER] to transmit the position request reply call to the selected station.

•Your position data is transmitted, when [DIAL•ENTER] is pushed.

--DSC Menu--

Position Reply

Transmitting

38