Set mode programming

Set mode is used to change the conditions of the transceiver’s functions: Scan type, Scan resume timer, Weather alert, Dual/Tri-watch, Beep tone, LCD contrast, Automatic foghorn fre- quency, Radio power, Scrambler type* and Scrambler code.*

*Appears only when the optional scrambler unit is installed.

Available functions may differ depending on how they are set by the dealer.

qTurn power OFF.

wWhile pushing and holding [16•9], turn power ON to enter Set mode.

eAfter the display appears, release [16•9].

rRotate [DIAL] to select the desired item, push [DIAL•ENTER].

tRotate [DIAL] to select the desired condition of the item. y Push [CLR], or rotate [DIAL] to select “Exit,” then push

[DIAL•ENTER] to exit set mode and returns to normal op- eration condition.

SET MODE CONSTRUCTION

--Set Mode--

 

˘Scan Type

Rotate

Scan Timer

WX Alert

 

 

Dual/Tri

 

Beep

 

Contrast

 

Foghorn Frequency

 

Radio Power

 

Scrambler Type

 

Scrambler Code

 

Exit

SET MODE 8

Set mode items

DScan type

The transceiver has 2 scan types: Normal scan and Priority scan. Normal scan searches all TAG channels in the selected channel group. Priority scan searches all TAG channels in se- quence while monitoring Channel 16.

--Set Mode--

Scan Type

 

Priority

 

7

˘Normal

 

 

 

 

 

8

<ENT˘OK>

 

Default: Normal

DScan resume timer

The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until the signal disappears. When ON is selected, the scan pauses 5 sec. and resumes even if a signal has been re- ceived on any other channel than Channel 16.

--Set Mode-- Scan Timer

ON

˘OFF

<ENT˘OK>

Default: OFF

55

Page 61
Image 61
Icom IC-M504 instruction manual SET Mode, Set mode programming, Set mode items, Scan type, Scan resume timer