Icom IC-M504 Receiving a geographical area call, Receiving a position request call

25W INT

TAG

Received

All Ships <Paul

<CLR˘

Beep Off> SAFETY

DReceiving a geographical area call

While monitoring Channel 70 and a geographical area call (for the area you are in) is received:

➥Emergency alarm or beeps sound depending on the re- ceived category.

➥“Received Geographic” appears in the display.

25W INT

TAG

Received

Geographic

<Osaka Bay

<CLR˘

Beep Off> SAFETY

➥Push [CLR] to stop the beep, then push [DIAL•ENTER] to change to the channel specified by the calling station for voice communication; push other key to ignore the geo- graphical area call.

➥Monitor the selected channel for an announcement from the calling station.

When no GPS receiver is connected or if there is a prob- lem with the connected receiver, all geographical area calls are received, regardless of your position.

DSC OPERATION 6

DReceiving a position request call

While monitoring Channel 70 and a position request call is re- ceived:

➥“Received POS Request” appears in the display.

➥Push [CLR] to stop the beep, then push [DIAL•ENTER] to reply to the position request call; push [CLR] to ignore the position request call.

25W	INT	6
TAG
Received
POS Request
<Paul
<CLR˘
Beep Off>	SAFETY

DReceiving a position report call

While monitoring Channel 70 and a position report call is re- ceived:

➥“Received POS Report” appears in the display.

➥Push [CLR] to stop the beep, then push [DIAL•ENTER] to reply to the position report call; push [CLR] to ignore the position report call.

25W INT

TAG

Received POS Report <Paul

<CLR˘

Beep Off> SAFETY

43