KRK Comprehensive Guide to V88 Car Video System Specifications and Features

Page 12

Specifications

THE V-88 POWERED STUDIO MONITOR

Frequency Response

39Hz -23kHz ±2dB

High Frequency Driver

Shielded 1-1/4” (33mm) Polymer Dome with Elliptical Wave Guide

Low Frequency Driver

Two (2) shielded 8” (203.2mm) Woven Kevlar®, High Sensitivity Voice Coil

Cabinet

55 liter bass reflex 1” (25mm) and ¾” (19mm) MDF construction,

 

50/50 Black / Gray Zolatone® Finish

Dimensions

20” W x 13-5/8” H x 16-3/4” D (279mm W x 406mm H x 425mm D)

Net Weight

50 lbs. ea. (17.27 kg)

THE V-88 AMPLIFIER

Power Rating

60 Watt HF Amplifier 160 Watt LF Amplifier

Signal to Noise

>90dB

T.H.D

<.05% at full output 1khz

Input Impedance

10k Ohms Balanced Input

Input Sensitivity

+6dB to –30dB

Gain

26dB (Fixed)

Power Consumption

160 VA

THE V-88 CROSSOVER

Crossover Frequency

2.3kHz

Crossover Slope

HF -12dB/Octave Butterworth

 

LF -12dB/Octave Butterworth

Subsonic Filter

12dB/Octave -3dB @ 21Hz

FEATURES

Neutrik® Combo Connector accepts XLR and ¼” phone and TRS connectors IEC Mains Connector

System Gain Control

3-Stage Selectable HF Gain Trim +1.0dB, Flat, -1.0dB

3-Stage Selectable LF Turnover Frequency -3dB @ 39Hz, 47Hz or 55Hz. LED Power Indicator

Power On/Off Muting and Delay

11

Image 12
Contents E R G U I D E Contents IntroductionHF Adjustment LF AdjustmentSystems Controls System GainConnecting Your System Powering onNeutrik Combo Connector Changing VoltageInstalling Your Monitors Positioning Your MonitorsChannel SET-UP Subwoofer SET-UP Channel Surround SET-UP Design Goals System HighlightsTroubleshooting Problem If there is no power, check to see ifProblem The monitor hisses, hums or makes other loud noises Page Specifications V-88 Powered Studio MonitorKRK and V-88 are registered trademarks of KRK Systems, LLC SafetyInstructions English Explanation of graphicalsymbols ConsignesdeSecuriteFrancais AvertissementExplication des symboles graphiques