Sitting area

3.Connect Front-Left satellite speaker to the Front-Left Output connectors at the back of the subwoofer.

4.Connect Rear-Right satellite speaker to the Rear-Right Output connectors at the back of the subwoofer.

5.Connect Rear-left satellite speaker to the Rear-Left Output connectors at the back of the subwoofer.

6.Connect Center satellite speaker to the Center Output connectors at the back of the subwoofer.

7.Make sure only the bare wire leads are connected, and the leads are connected to the correct terminals "-"and "+" for the best sound quality.

SPEAKER PLACEMENT

For the best 5.1 surround sound effect, please refer to the diagram below:

10~15cm(4 ~6 )

RIGHT

RIGHT SPEAKER

Note: Normally, audio devices like CD players, VCD players, MP3 players, etc.are unable to decode 5.1 CH for multi-channel surround sound effect. It is recommended to select "stereo" or "2.1 CH" input mode.

- 10 -