MidiLand 750 manual Troubleshooting, Symptom Possible Problem

Page 12

TROUBLESHOOTING

SYMPTOM

POSSIBLE PROBLEM

 

 

 

1.

System is not

1.

Check with the

 

 

connected to the wall

 

power plug.

 

 

outlet.

2.

Check the speaker

No sound output.

2.

The speaker cables

3.

cables.

 

 

are not connected with

Make sure the power

 

 

the output connectors.

 

switch located on the

 

3.

The power is not

 

rear panel is on.

 

 

turned ON.

 

 

No surround sound

The audio setting of the

Make sure that the audio

effect when choosing

DVD player.

setting of the DVD

DVD/5.1 output mode.

 

player is 5.1 CH.

 

 

 

Distortion occurred

The sound device has

1. Turn down the master

volume of the system.

when in high volume.

 

high level signal output. 2. Turn down audio

 

 

device s overall volume.

For further information or support, email us at tech@midiland.com or visit our FAQ

page at www.midiland.com.

Note:

1)Some DVD players have high level signal output . When the Master Volume is too high and the distortion occurs, please turn down the Master Volume to prevent damage to the speaker unit and amplifier.

2)You may not be able to enjoy 5.1 CH sound effect with this MLi-750 5.1 Home Theater Surround System if your DVD player does not come with analog 5.1 CH output terminals.

- 12 -

Image 12
Contents MLi-750 Specifications Warranty Safety Precautions Page Speakers Front Panel Rear Panel Master Volume Control Front Speaker L/R Balance Adjustment Connection for DVD players with analog CH output connectors Sitting area Output Select Troubleshooting Symptom Possible ProblemSpecifications Warranty