Marshall electronic V-R1041DP-AFHD operating instructions Marker Background, Center Marker

Page 11

On-Screen Menu (continued)

MARKER SETUP SUBMENU (continued)

4:3 Markers

Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the aspect ratio is set to 16:9, or when Pixel-to-Pixel™, Underscan, or H/V Delay is enabled.

OFF (No Marker)

95% Safe Area

93% Safe Area

90% Safe Area

88% Safe Area

80% Safe Area

4:3 Marker Examples:

OFF (No Marker)

90% Safe Area

Marker Background

Use this setting to choose how selected markers are displayed on the screen:

• OFF

The marker is superimposed on the complete image.

Half-tone

Image area beyond the marker is shown at 50% intensity.

Black

Image area beyond the marker is shown at 0% intensity (black).

Example (80% Marker in 4:3 Mode):

Background OFF

Half-tone Background

Black Background

Center Marker

Use this setting to display a center marker on the screen. This feature is not available when H/V delay is on.

Center Marker

11

Image 11
Contents Operating Instructions Page Contents Product Overview FeaturesUnpacking Installation and Initial SetupInstallation Connections and Power-OnPower Button Front Panel FeaturesPower Input Rear Panel FeaturesSDI VGA DVI-D Compatible Input FormatsMain Menu and Navigation On-Screen MenuStructure Overview Markers Marker Setup SubmenuCenter Marker Marker BackgroundAdjusting Color Gain Video Configuration SubmenuColor Temperature Presets Adjusting Color BiasPixel-to-Pixel Mode Monochrome ModeBlue-Only Mode Scanning Modes Aspect Ratio SettingsDelay Modes User-Definable Function Buttons System Configuration SubmenuSaving and Loading User Configuration Presets Internal Smpte Color BarsPanel SpecificationsFaceplate Dusting MaintenanceScreen Cleaning Optional Accessories Warranty Marshall Electronics, Inc