Marshall electronic V-R1041DP-AFHD System Configuration Submenu, Internal Smpte Color Bars

Page 15

On-Screen Menu (continued)

SYSTEM CONFIGURATION SUBMENU

Video Configuration Submenu

Internal SMPTE Color Bars

Use to display internally generated SMPTE split-field color bars.

User-Definable Function Buttons

Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor. The following options are available for each button:

• DELAY

Enable and rotate amongst delay modes.

RATIO

Toggle between 4:3 and 16:9 aspect ratios.

• BACK

Rotate amongst marker backgrounds.

• CENTER

Enable/disable center marker.

MARKER

Enable and rotate amongst marker settings (choices depend on aspect ratio setting).

• MONO

Enable/disable monochrome mode.

CTEMP

Rotate amongst color temperature settings.

PTP

Enable/disable Pixel-to-Pixel™ mode.

FUNCTION 1 is set to RATIO by default.

FUNCTION 2 is set to PTP by default.

Status Display

Use to enable on-screen display of input/format status in the upper-left corner of the screen.

Saving and Loading User Configuration Presets

Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. All monitor settings on the monitor are saved, including the image adjustment knob settings.

Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded by selecting MFG. (Factory defaults cannot be overwritten.)

Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.

15

Image 15
Contents Operating Instructions Page Contents Product Overview FeaturesUnpacking Installation and Initial SetupInstallation Connections and Power-OnPower Button Front Panel FeaturesPower Input Rear Panel FeaturesSDI VGA DVI-D Compatible Input FormatsOn-Screen Menu Structure OverviewMain Menu and Navigation Markers Marker Setup SubmenuCenter Marker Marker BackgroundAdjusting Color Gain Video Configuration SubmenuColor Temperature Presets Adjusting Color BiasMonochrome Mode Blue-Only ModePixel-to-Pixel Mode Aspect Ratio Settings Delay ModesScanning Modes User-Definable Function Buttons System Configuration SubmenuSaving and Loading User Configuration Presets Internal Smpte Color BarsPanel SpecificationsMaintenance Screen CleaningFaceplate Dusting Optional Accessories Warranty Marshall Electronics, Inc