Marshall electronic OR-841-HDSDI Main Menu and Navigation, Info Submenu, Input Submenu, Setup

On-Screen Menu (continued)

		R TALLY
		G TALLY
		B TALLY
REMOTE	PIN 1 THRU 8	LEFT R TALLY
	(Pin 5 is Ground)	LEFT G TALLY
		LEFT B TALLY
		RIGHT R TALLY
		RIGHT G TALLY
		RIGHT B TALLY
	RETURN
	FORMAT DISP	AUTO / ON / OFF
	TIMECODE	OFF / LITC / VITC1 / VITC2
		ALWAYS ON
		2 MIN
		5 MIN
SETUP	POWER SAVE	10 MIN
		30 MIN
		1 HOUR
		2 HOUR
	KEY LOCK	LOCK / UNLOCK
	RESET TO MFG DEFAULT >	REST NOW / CANCEL
	BACKUP USER CONFIG >	BACKUP NOW / CANCEL
	RESTORE USER CONFIG	RESTORE NOW / CANCEL

Main Menu and Navigation

Access the main menu by pushing the center MENU button on the front panel of the monitor.

•Step through menu items by using the RotoMenu control.

•Choose a submenu or select a menu item by pushing the RotoMenu control.

•Return to the previous menu by pressing the F-9 button.

•Exit the main menu by again pressing the F-9 button.

INFO SUBMENU

The INFO Submenu is a read-only display that gives the user information about the particular screen being viewed.

No adjustment can be made from this submenu.

INPUT SUBMENU

The Input sub menu allows the user to select either the SDI-1

/SDI-2 inputs or the Optional Input module if installed as the source to be displayed.

PICTURE SUBMENU

The Picture submenu allows the user to make adjustments to Brightness, Contrast, Saturation, Sharpness and Gamma.

12