■TimeCode
Selects among to following options: OFF / LTC / VITC1 / VITC2. In the most cases, the value of LTC and VITC1 will be identical to each other.
■ Power Save
• When enabled, the monitor will go to sleep after a predefined time has passed when loss of picture occurs.
• When a valid video format is detected, the monitor will wake up from the sleep state.
• Pressing any front panel keys will wake up the monitor.
• In the sleep state, all lights (including the backlight and front key indicators) are turned off.
• Any change in parallel remote status will wake up the monitor.
• Tally status is not affected by sleep mode.
■ Key Lock
When it is locked, user cannot use front panel keys except for accessing the menu.
■Reset to MFG Default
•This will Restore all configuration values and functions to the factory preset state.
•This will not change Model Name, Serial Number, or White Balance Data.
•Requires Confirm action by selecting Confirm again.
(Select Reset
•Resetting default will not effect backed up data.
■Backup User Configuration
•This command backs up all user information to secondary EEPROM (User settings)
•Requires Confirm action by selecting Confirm again.
(Select Backup
■Restore User Configuration
•This will Restore all configuration values and functions to the factory preset state.
•This will not change Model Name, Serial Number, or White Balance Data.
•Requires Confirm action by selecting Confirm again. (Select Reset
•Resetting default will not effect backed up data.
■Backup User Configuration
•This command backs up all user information to secondary EEPROM (User settings)
•Requires Confirm action by selecting Confirm again. (Select Backup
21