POSIFLEX Business Machines LM-2110 II. Model Numbers, III. Carton Contents, IV. Installation

Page 2
Power Connector in VGA Cable for LM-2110
Power Connector from Power Adaptor

II.MODEL NUMBERS

LM-2110: 10.4” LCD Monitor w/ stand

LM-2010: 10.4” LCD Monitor w/ support bracket for Posiflex hybrid terminals HT series

III.CARTON CONTENTS

1.LCD Monitor panel unit

2.Base stand (for LM-2110) or support bracket (for LM-2010)

3.Fixing screws (2x for LM-2010, 6x for LM-2110)

4.User’s Manual

5.VGA cable: 21867244100 (for LM-2110) or 21863241730 (for LM- 2010)

6.Power adaptor: ASP0P042WTB001 & power cord (for LM-2110)

IV. INSTALLATION

1.Use 2 fixing screws to fit the monitor stand (for LM-2110) or support bracket (for LM- 2010) to the back of the LCD panel as

arrowed in the right picture. Connect the

VGA cable to the connector at back of the LCD panel and screw in its fix screws as

circled in the same picture.

2. For LM-2110, connect the power connector at panel back end of VGA cable to the power connector as in left picture.

Connect and screw-fix the other end of

VGA cable to the appropriate VGA port of host system. Please check that the city power supply specification from the wall socket is within the operation range of the power adaptor. Insert the power adaptor to

the wall socket and the LM-2110 is ready for work.

3.For LM-2010, following actions shall be taken to install it onto HT systems with power for HT systems disconnected and also reference of the manuals of the HT systems.

On base unit of HT systems, there must be 4 screw hole covers on top side of its plastic top cover and the VGA cable hole cover within the pole cover of its back cable cover as in picture below. There are 2 bridges from each screw hole cover to the HT top cover and 3 bridges from the VGA cable hole cover to the pole cover as enlarged in the

Part 2

Image 2
Contents Features LM-2010 LCD Monitor User’s ManualII. Model Numbers III. Carton ContentsIV. Installation Accompanying drawings OSD functions OSDOSD buttons Brightness / Contrast Adjust Submenu There are Geometry Adjust Submenu There are 6 icons in this Exit Return to Tools submenu VI. Supported Display Modes Part T31454