High End Systems AF1000 user manual Random Function Programs, Advance Programs, Lightning Programs

Page 22

Random Function Programs

Immediately following the Standard Programs are three Random Function Programs. This set of programs is not dependant upon the number of assigned channels. Random Function Programs are annotated by F 1 , F 2 , and F 3 on the value display. This set of programs perform the following actions:

•F 1 –multiple fixtures will flash in a random pattern, but only one fixture will flash at maximum Intensity at a time.

•F 2 –single fixtures will flash in a random pattern and randomly go to full Intensity.

•F 3 –all fixtures will flash in a random pattern, one fixture at a time (sequentially) at random intensities.

Advance Programs

Following the Random Function Programs are the Advance Programs. The Advance Programs are annotated by A 1 through A 8 on the display. Advance Programs will randomly select from the available Standard Programs (refer to Table 2.1 for the available programs per channels). A 1 is the fastest Rate of program advancement and A 8 is the slowest Rate of program advancement.

Lightning Programs

The final set of programs are the Lightning Programs. These programs were specifically designed to emulate ground to cloud and inner cloud lighting at various distances. They are annotated by L 1 through L 7 on the display. The Lightning Programs operate differently from the previous programs. You may start and stop a Lighting Program three ways:

•hold the < flash> key down to begin the program and release the key to stop the program.

•press the < STANDBY> key (take the Mini Controller off Standby Mode) to begin the program and press the key again to turn Standby Mode on again and stop the program.

•by using Audio parameter 9 and an audio signal to trigger the start of the Lightning Program. Refer Audio Mode found later in this Chapter for further clarification.

Refer to the Addendum for the descriptions of the Lightning programs.

2-4Mini Controller User’s Manual

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Mini Controller 60600045 Rev. A1 Table of Contents Figures ADM-4 TOC-4Mini Controller User’s Manual About This Manual IntroductionText Style Specifications Safety InstructionsFeatures OverviewGetting Help Mini Controller Reference Front and Rear Panels of the Mini ControllerMini Controller AC power cable Intro-6Mini Controller User’s Manual Unpacking Chapter Installation and SetupInspect the Contents Save the Shipping MaterialsIntensity /Duty Cycle Settings System Configuration and Set UpAF1000 Switch Settings Before You BeginDMX Address Switch Setting Mini Controller Switch Settings System Set Up and CablingSystem Cabling Connecting the Audio Cable Chapter Mini Controller Operation Operating ProcessFlash Mode Standby ModeProgram Mode Program Select Return Program HoldStandard Programs Advance Programs Random Function ProgramsLightning Programs Program Function IntensityIncremental Function AdvanceRate Program Manipulation of Rate FunctionAudio Mode Audio ParametersAudio Rate or Intensity Manipulation Function Manipulation of Rate or Intensity NumberAppendix a Troubleshooting and Maintenance Support ChecklistPossible Problems and Solutions Table A.1 Trouble Shooting SolutionsGeneral Maintenance and Cleaning Mini Controller ResetMini Controller ROM Version Number 4Mini Controller User’s Manual Appendix B Warranty Information Limited Warranty2Mini Controller User’s Manual Addendum Table ADM.1 Available Programs for One FixtureTable ADM.2 Available Programs for Two Fixtures Table ADM.3 Available Programs for Three Fixtures Table ADM.4 Available Programs for Four Fixtures Table ADM.5 Available Programs for Five Fixtures Table ADM.6 Available Programs for Six Fixtures Table ADM.7 Available Programs for Seven Fixtures Table ADM.8 Available Programs for Eight Fixtures Table ADM.9 Available Programs for Nine Fixtures Table ADM.10 Available Programs for Ten Fixtures Table ADM.11 Available Programs for Eleven Fixtures Table ADM.12 Available Programs for Twelve Fixtures Table ADM.14 Advance Programs Table ADM.13 Random FunctionsTable ADM.15 Lightning Programs Table ADM.16 Intensity Parameters Intensity ParametersRate Parameters Table ADM.17 Rate ParametersAudio Parameters Table ADM.18 Audio ParametersADM-16Mini Controller User’s Manual

AF1000 specifications

The High End Systems AF1000 is an innovative and powerful fixture designed for the entertainment industry, particularly for live events and performances. Known for its versatility and advanced features, the AF1000 combines cutting-edge technology with user-friendly operation, making it a favorite among lighting professionals.

One of the standout features of the AF1000 is its high output capabilities. The fixture utilizes a state-of-the-art LED light source that delivers exceptional brightness while maintaining outstanding color fidelity. This results in vibrant colors and well-defined beams that can fill large venues with ease. With a wide color spectrum and various color mixing options, designers can craft stunning visual experiences tailored to their specific needs.

The AF1000 is equipped with an advanced optical system that offers precise control over beam shaping and focusing. This optical quality allows for sharp images and projections, making it ideal for intricate gobo patterns and effects. The fixture includes a variety of lens options, giving users the flexibility to adjust the beam angle according to the requirements of the show.

Another significant characteristic of the AF1000 is its extensive moving capabilities. The fixture features both pan and tilt functionality, allowing for dynamic movement across the stage. The smooth operation and responsive control enable lighting designers to create intricate light shows that enhance the overall atmosphere of any event.

Technologically, the AF1000 boasts integrated DMX control, allowing it to be easily integrated into existing lighting setups. Its compatibility with various control protocols ensures seamless communication with other lighting fixtures and controllers. Additionally, the fixture supports RDM (Remote Device Management), providing users with the ability to monitor and configure settings remotely, increasing efficiency during setups and performances.

The AF1000 is also built with durability in mind. Constructed from robust materials, it is designed to withstand the rigors of touring and high-demand environments. The innovative cooling system ensures the fixture operates at optimal temperatures, preventing overheating and enhancing longevity.

In summary, the High End Systems AF1000 stands out in the realm of professional lighting with its high output, advanced optical systems, dynamic movement capabilities, and robust construction. Its combination of cutting-edge technology and user-centric design makes it a powerful tool for lighting professionals, ensuring that it remains a top choice for high-profile events and productions.
Top Page Image Contents