High End Systems AF1000 user manual Mini Controller Reset, Mini Controller ROM Version Number

Page 29

Table A.1: Trouble Shooting Solutions

Problem

Probable Cause

Solution

 

 

 

 

 

 

Audio indicator does not

weak or no audio signal

check to ensure cable is

light up

 

properly connected, boost

 

 

audio signal (between 20

 

 

Hz to 100 Hz)

 

 

 

Audio indicator does not

bad audio cable

check the tip, ring, and

light up

 

sleeve resistance with a

 

 

Volt Ohm meter–replace

 

 

or repair cable

 

 

 

Audio indicator does not

a speaker level signal has

contact High End Systems

light up

been sent to the audio

Technical Support

 

connector

 

 

 

 

Audio indicator

audio signal is too strong

reduce audio signal

constantly stays on

 

 

 

 

 

Mini Controller Reset

The Mini Controller may be reset two different ways:

•press the < program>, <intensity>, <rate>, and <audio> keys simultaneously

•turn the configuration DIP switch to the Off position and return it to the On position

Note: when the Mini Controller is reset, all default values will be in effect and Standby Mode will be engaged.

Mini Controller ROM Version Number

To view the ROM version number, turn the Configuration Dip switch to the Off position and press any key. The ROM version number will appear on the display.

General Maintenance and Cleaning

You should clean your Mini Controller on a regular basis. Dust and dirt can accumulate and cause malfunctions. As a precautionary step, unplug the Mini Controller before cleaning. To clean the outer surfaces:

•Wipe with a soft cloth or tissue, or use a small vacuum to remove the built-up dust and dirt. Do not use a blower, as this will force dirt into the controller.

Warnings: Do not submerse in liquid. There are no user serviceable parts inside. Servicing should only be conducted by a qualified technician.

A

Appendix A Troubleshooting and Maintenance A-3

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Mini Controller 60600045 Rev. A1 Table of Contents Figures ADM-4 TOC-4Mini Controller User’s Manual Text Style IntroductionAbout This Manual Features Safety InstructionsSpecifications OverviewGetting Help Front and Rear Panels of the Mini Controller Mini Controller ReferenceMini Controller AC power cable Intro-6Mini Controller User’s Manual Inspect the Contents Chapter Installation and SetupUnpacking Save the Shipping MaterialsAF1000 Switch Settings System Configuration and Set UpIntensity /Duty Cycle Settings Before You BeginDMX Address Switch Setting System Set Up and Cabling Mini Controller Switch SettingsSystem Cabling Connecting the Audio Cable Operating Process Chapter Mini Controller OperationProgram Mode Standby ModeFlash Mode Standard Programs Program HoldProgram Select Return Lightning Programs Random Function ProgramsAdvance Programs Incremental IntensityProgram Function Function AdvanceProgram Manipulation of Rate Function RateAudio Parameters Audio ModeFunction Manipulation of Rate or Intensity Number Audio Rate or Intensity ManipulationSupport Checklist Appendix a Troubleshooting and MaintenanceTable A.1 Trouble Shooting Solutions Possible Problems and SolutionsMini Controller ROM Version Number Mini Controller ResetGeneral Maintenance and Cleaning 4Mini Controller User’s Manual Limited Warranty Appendix B Warranty Information2Mini Controller User’s Manual Table ADM.1 Available Programs for One Fixture AddendumTable ADM.2 Available Programs for Two Fixtures Table ADM.3 Available Programs for Three Fixtures Table ADM.4 Available Programs for Four Fixtures Table ADM.5 Available Programs for Five Fixtures Table ADM.6 Available Programs for Six Fixtures Table ADM.7 Available Programs for Seven Fixtures Table ADM.8 Available Programs for Eight Fixtures Table ADM.9 Available Programs for Nine Fixtures Table ADM.10 Available Programs for Ten Fixtures Table ADM.11 Available Programs for Eleven Fixtures Table ADM.12 Available Programs for Twelve Fixtures Table ADM.15 Lightning Programs Table ADM.13 Random FunctionsTable ADM.14 Advance Programs Rate Parameters Intensity ParametersTable ADM.16 Intensity Parameters Table ADM.17 Rate ParametersTable ADM.18 Audio Parameters Audio ParametersADM-16Mini Controller User’s Manual

AF1000 specifications

The High End Systems AF1000 is an innovative and powerful fixture designed for the entertainment industry, particularly for live events and performances. Known for its versatility and advanced features, the AF1000 combines cutting-edge technology with user-friendly operation, making it a favorite among lighting professionals.

One of the standout features of the AF1000 is its high output capabilities. The fixture utilizes a state-of-the-art LED light source that delivers exceptional brightness while maintaining outstanding color fidelity. This results in vibrant colors and well-defined beams that can fill large venues with ease. With a wide color spectrum and various color mixing options, designers can craft stunning visual experiences tailored to their specific needs.

The AF1000 is equipped with an advanced optical system that offers precise control over beam shaping and focusing. This optical quality allows for sharp images and projections, making it ideal for intricate gobo patterns and effects. The fixture includes a variety of lens options, giving users the flexibility to adjust the beam angle according to the requirements of the show.

Another significant characteristic of the AF1000 is its extensive moving capabilities. The fixture features both pan and tilt functionality, allowing for dynamic movement across the stage. The smooth operation and responsive control enable lighting designers to create intricate light shows that enhance the overall atmosphere of any event.

Technologically, the AF1000 boasts integrated DMX control, allowing it to be easily integrated into existing lighting setups. Its compatibility with various control protocols ensures seamless communication with other lighting fixtures and controllers. Additionally, the fixture supports RDM (Remote Device Management), providing users with the ability to monitor and configure settings remotely, increasing efficiency during setups and performances.

The AF1000 is also built with durability in mind. Constructed from robust materials, it is designed to withstand the rigors of touring and high-demand environments. The innovative cooling system ensures the fixture operates at optimal temperatures, preventing overheating and enhancing longevity.

In summary, the High End Systems AF1000 stands out in the realm of professional lighting with its high output, advanced optical systems, dynamic movement capabilities, and robust construction. Its combination of cutting-edge technology and user-centric design makes it a powerful tool for lighting professionals, ensuring that it remains a top choice for high-profile events and productions.
Top Page Image Contents