TROUBLESHOOTING
PROBLEM | SOLUTION |
IR remote inoperative | • Verify that the battery in the remote is fresh. |
| • Verify that the remote sensor eye is not obstructed. |
Disc won't play | • Insert a disc with the label side facing upwards. |
| • Check the type of disc you put into disc tray. This |
| DVD only plays DVD, audio CD and MP3s. |
| • Both the unit and the disc are coded by region. If the |
|
|
Play starts, but then stops | • The disc is dirty. Clean it. |
immediately | • Condensation has formed. Allow player to dry out. |
| |
|
|
No sound or distorted | • Make sure your DVD is connected properly. Make |
sound | sure all cables are securely inserted into the |
| |
| appropriate jacks. |
| • If you are using the |
| sure you turn on the IR headphone power, make sure |
| the correct channel (A or B) is selected. |
| • If the FM Modulator is ON make sure proper |
| frequency has been selected. |
|
|
Cannot advance through a | • Most discs prohibit advancing through the opening |
movie | credits and warning information that appear at the |
| |
| beginning of movies. |
|
|
The icon ( ) appears on | • The feature or action cannot be completed at this |
screen | time because: |
| |
| 1. The disc’s software restricts it. |
| 2. The disc’s software doesn’t support the feature |
| (e.g., angles) |
| 3. The feature is not available at the moment. |
| 4. A title or chapter number that is out of range has |
| been requested. |
Picture is distorted | • The disc might be damaged. Try another disc. |
| • It is normal for some distortion to appear during |
|
|
AVXMTGHR1D | 25 |