8)Install the headrests:
a.Remove vehicle's original headrests.
b.insert appropriate support tube adaptors in vehicle post guides. (if needed)
c.Hold the headrest above the seat and insert the two cables into the vehicle support guides Make sure that the headrest is in the correct position (Display facing the rear).
d.Route the cables through the seat back and out the bottom of the seat while pulling the cables to remove the slack. Be sure to leave enough slack in the monitor cables to allow the headrest to move up or down.
9)Connect all the components together (electrically) and verify proper operation of all the system functions.
Wireless FM Modulator
The AVXMTGHR1D is equipped with a
Whenever the FM Modulator is on, broadcast reception on the vehicles radio will be poor. Switching the FM Modulator off will allow normal radio reception.
NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM signal may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in your headrest monitor.
AVXMTGHR1D | 7 |