Audiovox HR7008PKG specs

HR7008PKG

The HR7008PKG contains two vehicle specific head-rests. Each has a 7" Monitor with touch screen control and built-in DVD Player. This

system allows the users to either watch individual DVD s or watch the same DVD on both monitors. Both users can also share others program. The full function remote control can operate either unit by selecting MI or M2 on the remote.

Quick Start Guide

1.Turn on the M1 monitor, push the center tab at the top of the screen, screen down.

2.Insert a DVD, CD or MP3 disc into the slot, disc label toward driver.

3.The disc will start playing.

4.Tilt the monitor to a comfortable viewing position (the headrest itself can be tilted forward to help achieve a comfortable viewing position).

5.Each wireless headphone has a CH A/CH B switch. When sitting in front of the M1 screen, use the CH A switch setting. When sitting sitting in front of the M2 screen, use the CH B switch setting. Set the headphone to the proper channel and press the Power

On/Off switch. The power indicator will light up red. Turn the volume down to its lowest setting before putting them on your head.

6.When the DVD menu appears, select the menu item using the cursor keys and touch the OK or Play button.

7.If audio playback through the vehicle radio is preferred, use the FM transmitter On/Off button on the remote control. Set the vehicle radio to the channel selected on the M1 monitor. If interference with a local radio station occurs, set the FM modulator to one of the other 16 radio frequencies using the CHANNEL SELECT button on the remote control.

8.Turn on the M2 Monitor using the power button on the front of the screen or remote control.

9.Tilt the screen to a comfortable viewing position (the headrest itself can be tilted forward to help achieve a comfortable viewing position).

10.Touch the screen and touch on M1 or use remote control to press SOURCE to view program from M1 or select from the other available sources DVD, MEMORY CARD, USB, A/V IN or SMART PORT AUX for M2 Monitor.

NOTE: To operate the M1 screen, press M1 on the remote control.

To operate the M2 screen, press M2 on the remote control.