DVD Player Operation
Preparation
1.Turn on the player’s power by switching the POWER switch on the side of the player to “ON”.
2.Unlatch the LCD panel and lift it up.
3.Press the OPEN button on front panel to open the disc cover.
4.Load disc with the label facing up.
5.Close the disc tray cover, pressing the area of the disc cover that says “Press”. The player will automatically search for the disc and start playback.
Playback of DVD Disc
When the DVD menu appears press the direction buttons ( | ) to select an |
option. Press the ENTER or PLAY to start the selected option. |
|
Pause
Press the PAUSE button once on the remote control to pause playback. Press the PLAY button again to resume normal playback.
Zoom
Press the ZOOM button on the remote control to cycle through the different zoom settings. While in the zoom mode use the direction buttons to move around to different positions on the screen.
Stop
During playback, press the STOP button once on the remote control to stop playback of a disc. Press the PLAY button and the DVD Player will resume playback of the disc from the point where it was stopped.
Screen Mode
Press the MODE button on the front panel to switch the screen aspect ratio between 16:9 and 4:3. Press the MODE button again to turn the screen off and once again to cycle back to 16:9
Previous and Next |
|
Press the PREV | button once to return to the currently playing Chapter or Track. |
Press the PREV button twice and playback will start from the previous Chapter or
- 21 -