CONTROL FUNCTION DESCRIPTION (FRONT VIEW)
9.POWER (
) Button
Used to turn the system on/off.
10.Dome Lights
Provide additional interior illumination.
11.Infrared Transmitter and Sensor
Transmits audio to wireless headphones. Also allows the remote control to operate the VOD128 and to control other accessories in the system.
12.Three Position Dome Light Switch ON – Turns on the dome lights.
OFF – The dome lights will not turn on in this position. AUTO – Automatically switches on the dome lights in conjunction with the vehicle's interior illumination.
13.Ventilation Openings
14.LCD Cut Off Switch
Used to turn off the LCD panel monitor when in the closed position.
15.LCD Panel
16.Screen Release
Press to release the screen.
17.USB 1.1 INPUT FOR USB THUMB DRIVE
18.SD Card Reader - Allows reading the contents (Audio, Photo, Video) data stored on the Secure Digital Card (SD Card).
The VOD128 has an option that allows the user to select from two IR transmit and receive codes (M1 or M2). This feature can be used when using two VOD128s in the same installation or if the vehicle has an RSA (Rear Seat Audio) that uses an “A” channel headset. The VOD128 comes factory set to M1. When in the M1 mode the unit will respond to remote commands when M1 is selected on the remote and will transmit audio on the A channel. When in the M2 mode the unit will respond to remote commands when M2 is selected on the remote and will transmit audio on the B channel.
Note:
Note:
OSD will appear on the screen for 4~5 seconds
Selecting a Monitor Code (M1 or M2)
1.Press and hold the SOURCE and FMM buttons on the unit for 3 seconds and the unit will switch from M1 to M2
or M2 to M1.
2.The selected mode (M1 or M2) will be retained in memory until changed by the user.
FMM 88.3MHz | AUX/GAME | FMM OFF | DVD |
M1 | M2 |
IRT ON
IRT OFF
5