*Function control is available on the unit and the remote control.
**Function not available in this model.
1.POWER Button*
Press this button to turn the unit ON and OFF.
2.MONITOR SELECT
M1 Button – Sets the remote control code to allow control of the unit set to M1 mode. (See page 5 for details)
M2 Button – Sets the remote control code to allow control of the unit set to M2 mode.
3.SYSTEM MENU Button
Allow the user to access the system menu. Press cursor (pq) buttons to select desired screen mode, OSD language and source default on power up.
4.TV Mode Select Button**
Switches certain function keys on the remote control for TV functions.
5.SOURCE Button*
Each time the button is pressed, the audio / video source will change in the following sequence: DVD > VIDEO 1, VIDEO 2, VIDEO 3.
6.AUTO MEMORY Button (AUTO PROGRAM Button)**
When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient levels are automatically stored in memory.
7.SKIP / SEARCH Button**
This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on channels that are programmed into memory when the CHANNEL UP / DOWN buttons are used. When the SKIP mode is disabled, the TV will stop on all active channels.
8.ERASE / WRITE Button**
While tuned to a channel, pressing this button will alternately store or erase the channel from memory.
8