1). Follow the installation instruction shown in Item 1, 2 or 3.
2). Detach the monitor from the main unit by depressing the but ton below the screen with one hand and remove the monitor with the other hand. Take the pouch from the rear compartment of the bag. Slide the monitor into the pouch, and make sure to feed the bottom piece of the pouch into the long slot at the bottom of the monitor and attach the Velcro strap to fasten the monitor in the pouch. Then loop the strap of the pouch around the headrest and pull the end of the strap while holding the buckle until the pouch is tightly secured.
3). Insert one end of the DIN cable into the PORT on the right side of the detached monitor, and the other end into either MONI- TOR 1 port or MONITOR 2 port on the left side of the main unit.
5.Placing the system in a hotel/office/home (Refer to Figure 11)
Figure 11
1). Just place the system on a table or other level surface with the system bottom facing down. Uncover the monitor and adjust the screen for the desired viewing angle. This can be done with or without the unit inside its bag. You can remove the main unit from the bag by unfastening the inside Velcro strap of the bag.
11