3.Installing the system on the back seat in a car (Refer to Figure 9)
There is no need to remove the four straps from the bag as they are not used in this installation.
Figure 9
Carefully place the system (front facing up) on the back seat. Guide the vehicles safety belt through the short strap sewn on the back of the bag. Then secure and adjust the safety belt so that the sys- tem is not free to move around. Finally uncover the bag, swing the monitor upward and adjust the screen for a desired viewing angle. Ensure the inside Velcro strap of the bag is fastened to prevent the unit from falling.
4.Installing the detached monitor onto the seat back in a car (Refer to Figure 10)
Figure 10
10