E. Installation
1.Installing the system onto the seat back in a car (Refer
to Figure 7)
Figure 7
1)Unfasten the rear Velcro straps of the bag. Fold inwards the rear piece of the bag and attach its end velcro strap to the lower Velcro strap on the back of the bag to form a triangle.
2)Hang the bag onto the seat back by looping the shoulder strap of the bag around the headrest of the seat.
3)Take one of the supplied straps from the lower compartment of the bag, and connect the latch to the lower metal ring on the left side of the bag. Attach the "S" hook to the same ring after looping the strap around the seat rail. Repeat this process for the right side. In some vehicles, it may be necessary to attach the "S" connector to the rail directly, as it may not be long enough to reach back to the ring.
4)Adjust the straps tightly so that the bag is secured.
8