DVD Remote Function Descriptions
1.DVD POWER ON/OFF Button*
Press this button to turn the PROVD8 on. The DVD or selected video source will be displayed on screen and the picture will appear in a few seconds. Press the button again to turn the PROVD8 off.
2.SOURCE Button
Video equipment connected to the AUDIO/ VIDEO inputs can be selected and displayed on the LCD display screen by pressing this button. Each time the button is pressed, the Audio / Video source will change in the following sequence: DVD, TV, AV1 and AUX.
3.AUTO MEMORY
When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient levels are automatically stored. Please refer to page 3 for more information on TV reception.
4. SKIP / SEARCH
This button selects between SKIP and SEARCH modes. In “SKIP mode” the TV tuner will tune and stop on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When the SKIP mode is disabled, the TV will stop on all active channels.
5. ERASE / WRITE
While tuned to a channel, pressing this button will store or erase the channel from memory. The stored channel numbers are displayed in “GREEN” on the LCD display screen, and the
6.Channel Up (p) Button
Use this button to increase the channel number to the desired channel and to scroll upward in menu options.
7.MUTE Button
Press this button to mute the audio while using wired headphones.
Pressing the button again restores sound to the previously set level.
8.ENTER Button
Used to select or switch a highlighted selection.
*Function control is available on the unit and the remote control.