CABLE TV (CATV) OPERATION
In addition to normal broadcast reception of VHF and UHF channels, if you are a cable TV subscriber, your new TV is capable of receiving many unscrambled cable channels without the use of a converter box.
When set to broadcast TV it receives channels 2~69. When set to the CATV mode (STD) it receives channels 1 ~ 125 (see chart).
SETTING THE “ANTENNA INPUT”
1.Press the MENU button. The Main Menu will appear on the screen.
2.Press the channel p or q buttons to highlight ANTENNA INPUT and press ENTER. The Antenna Menu will appear on the screen.
3.Press the channel p or q buttons to highlight either Air or Standard and press ENTER.
ENTER
AUTO PROGRAM FUNCTION
1.Press the MENU button. The Main Menu will appear on the screen.
2.Press the channel p or q buttons to highlight AUTO PROGRAM and press ENTER. The Program Menu will appear on the screen.
3.Press the channel p or q buttons to highlight AUTO PROGRAM and press ENTER.
ENTER
Channels | Off Air | Cable |
Low VHF (Channel 01) | - | 1 |
VHF (Channels 2 ~ 13)* | 12* | 12* |
UHF (Channels 14 ~ 69)* | 56 | - |
Low Midband | - | 5 |
Midband (Channels 14 ~ 22 or A ~ I) | - | 9 |
Superband (Channels 23 ~ 36 or J ~ W) | - | 14 |
Ultraband (37 ~ 94 and 100 ~ 125 or w+29 ~ w+48) | - | 84 |
Total* | 68 | 125 |
12