Hotkeys, Clear vision | AOC i2352Ve specification

Hotkeys

1Clear vision /-

24:3 or Wide/+

3Source/Auto/Exit

4Menu/Enter

5Power

Power

Press the Power button to turn on/off the monitor.

Clear vision / -

1.When there is no OSD, Press the “-” button to activate Clear Vision.

2.Use the “+” or “-” buttons to select between weak, medium, strong, or off settings. Default setting is always “off ”.

3.Press and hold“-” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision

Demo: on” will be display on the screen for a duration of 5 seconds, press Menu or Exit button, the message will disappear, Press and hold “-” button for 5 seconds again, Clear Vision Demo will be off.

Clear Vision function will provides the best image viewing experience by converting low resolution and blurry images into clear and vivid images.

4:3 or Wide/+

When there is no OSD, press + continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the hot key is disable to adjust. )

Auto / Exit / Source hot key

When there is no OSD, press Auto/Source button continuously about 2 second to do auto configure.

When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously to select the input source showed in the message bar, press Menu/Enter button to change to the source selected.