Asus VN289QL manual Image

Page 18

3.Image

You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR, Position (VGA only), Focus (VGA only), and Auto Adjust (VGA only), from this main function.

VN289

Standard Mode VGA 1920x1080 @ 60Hz

Splendid

Color

Image

Sound

PIP/PBP Setting

Input Select

System Setup

Shortcut

Sharpness

Trace Free

Aspect Control

VividPixel

ASCR

Position

Focus

AUTO Adjust.

Sharpness: Adjusts the picture sharpness. The adjusting range is from 0 to 100.

Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.

Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, “1:1”, “Overscan”.

VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.

ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.

Position: Adjusts the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 (Only available for VGA input).

Focus: Reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100 (Only available for VGA input).

AUTO Adjust.: Automatically adjust the image to its optimized position, clock, and phase. (Only available for VGA input.)

• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.

Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.

3-4

Chapter 3: General Instruction

Image 18
Contents User Guide Table of contents Federal Communications Commission Statement Safety information Care & Cleaning Where to find more information Package contents WelcomeAssembling the monitor base Connect cablesDetaching the cable cover Rear of the LCD monitor Using the Controls button Monitor introductionAsus LCD Monitor VN289 Series Alignment Grid QuickFit FunctionDetaching the arm/stand for Vesa wall mount Adjusting the monitor How to reconfigure OSD On-Screen Display menuOSD Function Introduction SplendidColor Select the image color you like from this functionImage Adjust the sound settings to your preference PIP/PBP SettingSound PIP window size Input signalTop, Right-Bottom, or Left-Bottom Input SelectSystem Setup Adjusts the system configurationGamePlus main-Timer ECO Mode Activate the ecology mode for power savingShortcut Selecting this option allows you to set two shortcut keysSpecifications ModelTroubleshooting FAQ Possible SolutionSupported Timing List Vesa / IBM Modes Support Timing