Speaker Setup, Normal setting is Stereo

Advanced Setup

3. GENERAL PAGE

SPEAKER SETUP PAGE

DOWNMIX

MAIN PAGE

LT/RT:

Sends the Left and Right channels of the 5.1 channel surround mix to the main left and right outputs.

STEREO:

Stereo remixes all of the main channels to the two stereo channels.

4.AUDIO SETUP

Select the input and output formats, SPDIF OUTPUT setting, and Compression options.

AUDIO SETUP

SPDIF OUTPUT

DUAL MONO

COMPERESSION

LPCM OUTPUT

MAIN PAGE

SPDIF OUTPUT:

Leave on Analog (default) to use the conventional 5.1 output. Set to SPDIF/RAW to use the coaxial output to feed an exter- nal Dolby Digital or DTS surround processor.

Set to SPDIF/PCM (Linear Pulse code Modulation) to feed an outboard stereo D to A converter Stereo-only digital input.

DUAL MONO:

The normal setting is STEREO.

L-MONO:sends only the left channel signal to both Left and Right output channels.

R-MONO:sends only the right channel output to both chann- nels. These two selections are useful for some VCDs which may have one language on each channel in mono. MIX-MONO:mixes both left and right channnels, sending the resulting mono mix to both output channels. Use this when you are using a mono speaker/amplifier system, or older TV with a single speaker.

COMPRESSION:

Controls the amount of dynamic range compression from FULL compression to no compression (OFF). You may freely adjust this to your taste.

LPCM OUTPUT:

Lets you set the optical digital output sampling rate to 48KHz (default) or 96KHz.