Axis Communications Axis P7216 Video Encoder Safety Instructions, Transportation, Battery

Page 6

AXIS P7216 Video Encoder

Safety Instructions

NOTICE

The Axis product shall be used in compliance with local laws and regulations.

To use the Axis product outdoors, or in similar environments, it shall be installed in an approved outdoor housing.

Store the Axis product in a dry and ventilated environment.

Avoid exposing the Axis product to vibration, shocks or heavy pressure.

Do not install the product on unstable or vibrating brackets, surfaces or walls.

Use only applicable tools when installing the Axis product. Excessive force could cause damage to the product.

Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.

Use only accessories that comply with technical specification of the product. These can be provided by Axis or a third party.

Use only spare parts provided by or recommended by Axis.

Do not attempt to repair the product by yourself. Contact Axis support or your Axis reseller for service matters

Transportation

NOTICE

When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.

Battery

The Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years.

Low battery power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear when the battery needs replacing.

The battery should not be replaced unless required, but if the battery does need replacing, contact Axis support at www.axis.com/techsup/ for assistance.

WARNING

Risk of explosion if the battery is incorrectly replaced.

Replace only with an identical battery or a battery which is recommended by Axis.

Dispose of used batteries according to local regulations or the battery manufacturer's instructions.

6

Image 6
Contents Installation Guide Intellectual Property Rights Legal ConsiderationsLiability Equipment ModificationsKorea Page Axis P7216 Video Encoder Safety Information Hazard LevelsOther Message Levels Axis P7216 Video Encoder Safety Instructions BatteryTransportation Package Contents Axis P7216 Video Encoder Installation GuideInstallation Steps Hardware OverviewLED Indicators Axis P7216 Video EncoderColor Indication Connectors For specifications, seeSpecifications Power ConsumptionOperating Conditions Terminal connector Function Pin SpecificationsPower connector Audio connectorInstall the Hardware Mount the video encoderAuxiliary Connector Access the Product Reset to Factory Default SettingsConnect the cables Further Information Warranty Information Installation Guide

P7216 specifications

Axis Communications P7216 is a powerful video encoder designed to deliver high-quality video streaming from analog surveillance cameras to IP networks. This device plays a crucial role in modernizing older CCTV systems by converting their output into a digital format compatible with IP technology. The P7216 is particularly well-suited for organizations looking to enhance their surveillance capabilities without having to fully replace their existing analog cameras.

One of the standout features of the P7216 is its ability to transmit up to 16 analog video channels simultaneously. This high channel capacity makes it ideal for large-scale installations where multiple cameras are in use. In addition to video, the device also supports audio streaming, allowing for two-way audio communication, which adds an extra layer of functionality to the surveillance system.

The P7216 is equipped with advanced H.264 video compression technology, which optimizes video quality while significantly reducing bandwidth and storage requirements. This efficient compression ensures that even high-resolution analog cameras can send real-time video streams without overwhelming network resources. Moreover, it supports multiple streams, enabling different resolutions or formats to be sent to various devices based on specific needs.

With a robust web-based management interface, users can easily configure and manage the P7216 remotely. This feature simplifies the process of setting up video encoders across multiple sites and helps in monitoring the entire surveillance system effectively. Additionally, the device is compatible with a wide range of video management software (VMS), allowing users to integrate it seamlessly into existing security infrastructure.

The P7216 also boasts advanced security features, including HTTPS encryption, password protection, and secure network protocols, which help safeguard sensitive footage against unauthorized access. Its rugged design is specifically built for durability, making it suitable for a variety of environmental conditions.

Overall, the Axis Communications P7216 combines versatility, reliability, and advanced technology, making it a valuable addition to any surveillance setup. By leveraging its capabilities, organizations can maximize the utility of their analog systems while moving towards IP-based surveillance solutions, ensuring enhanced security and operational efficiency.