4/23/2007
ELITE SCREENS INFRARED REMOTE CONTROL CODE
1.Spectrum, VMAX2 (Plus), Home2(3) and Tension2(3) Series The wave shape of sending :
And the difference between “0” and “1”
1
3a
a a
0
3a
“a” is the wave period of 16 X 38K.
Up: 1111 0000 0001
Stop:1111 0000 0010
Down:1111 0000 0100
2. VMAX (Plus), SilverMax, CineTension Series
2.1: Type U ( VMAX Only)
Frequency：455Khz
UP ：010010000
STOP ：010001000
DOWN : 010000100
2.2Type G ( VMAX, SilverMAX and CineTension) MCU Code(IR + RF control code protocol) Remote
Head code+8 digital address code+8 digital operation code Head Code = 48 counts (Count Clock=32767time/sec) Digital "1"=24 counts (Counter clock = 32767tim/sec) Digital "0"=12Counts (Counter clock = 32767tim/sec)
Low level voltage in between each digi. =24 (Counter clock=32767time/sec)
8 digits address code:
1~5digits mapping code to circuit board , high 3 digits and then 0 8 digits operation code
UP ：0xDD
STOP ：0xCC
DOWN ：0xEE
2.3Type X ( VMAX Only)
(1) IR Controller is using IC # 2272 and 22262 to send and receive. Frequency: 38KHZ
UP ：1000
STOP ：0100 DOWN : 0010
3.Home Series
Up ： 0xB1 0x4E 0x90 0x6F
Stop ： 0xB1 0x4E 0x8A 0x75
Down ： 0xB1 0x4E 0xCA 0x35
Elite Screens Inc.
Main: (562)